Lubricating oil additive
Number of views:
Lubricating oil additive
Product serial number
Kol ate 7013: The aluminum content is 12.7%. It is a solution containing 50% cyclic aluminum isopropoxide trimer based on a hydrogenation and epoxidation base oil with a general viscosity of 100SUS. Color and consistency are similar to honey.
Kol ate 7013 LV: a solution with an aluminum content of 12.7% and an aluminum isomeric trimer content of 50% concentration. Compared with Kol ate 7013, its carrier oil has lower viscosity, colorless and transparent appearance, and has NSF H1 certification, which can be used to prepare food-grade grease. The carrier oil is a food grade low viscosity white oil (CAS 8042-47-5) that complies with FDA requirements and can be found in CFR 178-3620.
Kolate 6030: 5.3% aluminum content. This product is a semi-saponified trimer product pretreated with 0.3 parts of benzoic acid and 0.6 parts of fatty acid. The carrier oil is the same as 7013LV, with NSF H1 certification, and can be used to prepare food-grade greases.
Kolate MX-445: Aluminium content 13.1%, liquid state, is a mixture of various aluminum alkoxides dissolved in mineral white oil. Is a new product that can replace aluminum isopropoxide powder. Compared with aluminum isopropoxide powder, its advantages are as follows:
Liquid-easy to handle
Non-Dangerous Goods Rating-According to shipping regulations, this product is not classified as flammable
High flash point, 170oF (flash point of aluminum isopropoxide powder is 56 oF)
Quality continuity-M X-445's aluminum content is stable and easy to control, and the quality of products made from this material is high.
Strong brand and stable product quality;
Liquid, easy to disperse or pump, easy to stir and disperse uniformly during the reaction feeding process, short production time, easy to control process
There are a full range of products, including 6030 (no need to add water at the end of the reaction and no isopropanol release), 7013LV (no need to add water at the end of the reaction and one mole of isopropanol to release), MX-445 (add water at the end of the reaction, isopropyl alcohol release AIP) to meet the needs of different customers;
Compared with AIP, its self-forming property on the liquid surface makes it not absorb external moisture and deteriorate, which is greatly convenient for storage;
Non-toxic, with NSF H1 certification, can be used directly in the production of food-grade grease.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table